Reset Waste Ink Canon MP160 dan MP145

Canon MP160 , MP145

1. With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
   
2. When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
   
3. When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
   
4. When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
   

The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off

1. time Orange Service pattern print
   
2. times Green EEPROM print
   
3. times Orange EEPROM reset
4. times Green Waste ink counter reset
   
5. Unplug cable power. (for MP145 / MP150)
   
6. Turn Off Power. (for MP160)
   

Error Code :

1. E2-2 = No paper (ASF)
   
2. E3-3 = Paper jam
   
3. E4 = No ink
   
4. E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
   
5. E8 = Waste ink absorber full, or platen waste ink absorber full
   
6. E9 = The connected digital camera / video camera does not support Camera Direct Printing
   
7. E14 = The Ink cartridges whose destination are wrong
   
8. E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
   
9. E16 -E19 = Failed to scan head alignment sheet
   
10. E22 = Carriage error
    
11. E23 = Paper feed error
    
12. E24 = Purge unit error
    
13. E25 = ASF(cam) sensor error
    
14. E26 = Internal temperature rise error
    
15. E27 = Waste ink absorber full or platen waste ink absorber full
    
16. E28 = Ink cartridge temperature rise error -
    
17. E29 = EEPROM error
    
18. E33 = Paper feed position error
    
19. E35 15 = USB Host VBUD overcurrent error - USB
    
20. E37 17 = Abnormal motor driver error
    
21. E40 20 = Other hardware error
    
22. E42 22 = Scanner error
    

MERESET WASTE INK COUNTER PADA CANON MP160 DAN MP145

1. Matikan printer (kabel power masih tercolok), tekan dan tahan tombol STOP/RESET kemudian tekan tombol ON/OFF dan lepas STOP/RESET
   
2. Tahan tombol ON/OFF, tekan tombol STOP/RESET 2x
   
3. Lepaskan kedua tombol dan printer akan masuk ke SERVICE MODE (muncul angka NOL)
   
4. Printer akan charging
   
5. Setelah printer selesai charging, tekan tombol STOP/RESET 4x.
   
6. Setiap kali tombol STOP/RESET ditekan, lampu ON/OFF akan berubah warna hijau dan oranye.
   
7. Tekan tombol ON/OFF 1X, angka berubah ke SATU (1)
   
8. Matikan printer dan cabut kabel POWER.
   
9. Hidupkan kembali printer
   

Kode Error Canon MP160 dan MP145

1. E2-2 = No paper (ASF)
   
2. E3-3 = Paper jam
   
3. E4 = No ink
   
4. E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
   
5. E8 = Waste ink absorber full, or platen waste ink absorber full
   
6. E9 = The connected digital camera / video camera does not support Camera Direct Printing
   
7. E14 = The Ink cartridges whose destination are wrong
   
8. E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
   
9. E16 -E19 = Failed to scan head alignment sheet
   
10. E22 = Carriage error
    
11. E23 = Paper feed error
    
12. E24 = Purge unit error
    
13. E25 = ASF(cam) sensor error
    
14. E26 = Internal temperature rise error
    
15. E27 = Waste ink absorber full or platen waste ink absorber full
    
16. E28 = Ink cartridge temperature rise error -
    
17. E29 = EEPROM error
    
18. E33 = Paper feed position error
    
19. E35 15 = USB Host VBUD overcurrent error - USB
    
20. E37 17 = Abnormal motor driver error
    
21. E40 20 = Other hardware error
    
22. E42 22 = Scanner error

Source