Blog :: Ranto

Blog

Setting internet Modem Huawei with IM3

10/10/2009 14:07

Here i try to tell how to setup internet connection with Im3. seeting internet conection using modem HUAWEI is really easy. to setup modem huawei E158G menu setting is with click booton Tool --->> options--->>profile managaments.. to set it just follow instruction below:

For Time based :

- Profile Name = ISAT 3G

- Dial Number = *99***1#

- User Name = indosat@durasi

- Password = indosat@durasi

- APN (Access Point Name) = indosatgprs

Untuk Volume based :

- Profile Name = ISAT 3G

- Dial Number = *99***1#

- User Name = indosat

- Password = indosat

- APN (Access Point Name) = indosatgprs

IP settings, Authentication Protocol Settings, DNS setting, WINS settings: dynamic.

see picture Huawei:

and then ready to brwsing...

Chace Memory

10/10/2009 01:29

Cache memory is memory that has a very high speed, which is used as an intermediary between the RAM and CPU. This memory has higher speed than RAM, This memory is used to bridge differences CPUwhich has very high of speed with the RAM which has speed much lower. Using a cache, some data can be transferred to the memory and then ALU will retrieve the data from this memory. With this approach, data processing can be done faster than if the CPU takes data directly in RAM.

ROM

10/10/2009 01:07

ROM (Read-Only Memory, or sometimes called firmware) is a type of memory which contents are not lost when no electricity and only can be read. ROM on a computer provided by vendor just content programs or data. in the PC it can be called a ROM BIOS (Basic Input / Output System) or ROM BIOS. Instructions in the BIOS is to be run by the microprocessor when the computer start up. processors generally contained in the BIOS are like:

Checking the contents of CMOS (Compmentary Metal-Oxyde Semiconductor is a type of chip that requires power from the battery).
Load handling interruptions (interrup handlers) and control devices (device drivers).
Initialize registers and power management.
Hardware test (POST or the power-on self-test) to check that all hardware in good condition.
Display settings on the system.
Determining the devices to be used to run programs (for example, is hard disk perantinya).
Taking the contents of the boot sector. Boot sector is a small program by the BIOS this program is loaded into RAM and then the microprocessor will execute the commands existing in the RAM.

example : operating system windows is loaded

source

Procesor

10/10/2009 00:41

Processor is the short name of the microprocessor CPU (Central Processing Unit). These components form a chip (or IC chip / Integrated Circuit) is a piece of silicon the size of a few millimeters square that contains tens of thousands of transistors and other electronic components.

Processors are often referred to as the brain of the computer, even though the reference to such a completely inappropriate. Processor only acts as a processing machine but not as a reminder. Reminder function is handled by a separate component called a memory. Processor holds a very important role in the computer system in which various aspects as can be seen as follows:

Performance: processor type used will affect the performance of computer systems. The ability of a processor determines the maximum performance can be achieved by a computer system.
Support software: a faster processor allows the use of new software or new features.
The reliability and stability: One of the supporters of the reliability and stability of computer systems is the quality of the processor.
Cooling and energy consumption: first processor power consumption is only a relatively small percentage of the components of the other. However, further, the processor consumes power even greater power than the previous generation. Of course, this situation causes heat processor faster and its required cooling system.
Support motherboard: The existence of various of processor demanding appropriate motherboard. Meanwhile, the motherboard itself determine the capabilities and performance of the system.

SOURCE

RAM

09/10/2009 23:45

Internal memory or main memory functions for:

Storing data from devices and send it to the ALU for processing.
Store data in ALU before being sent to the output device.
Accommodate the programs or instructions that come from devices or from secondary reminder tool.

RAM (Random-Access Memory) is one type of internal memory which determines the ability of a computer. Internal memory can be called the main memory, This component serves as a reminder.

RAM is a type of memory which has contents can be changed in any time as system is running and has capabilty remember of data or program as long get current of electricity and can store and retrieve data very quickly.

Types of RAM :

DRAM (Dynamic RAM) is a type of RAM must be periodically refreshed by the CPU in order the data contained therein is not lost.
SDRAM (Synchronous Dynamic RAM) is a type of RAM is the most commonly used in PCs nowdays. RAM is synchronized by the clock system and has speed higher more than DRAM. its Suitable for systems with a bus speed up to 100 MHz.
SRAM (Static RAM) is a type of memory that does not need to freshen up the CPU to the data contained therein. This type of RAM has a higher speed than the DRAM.
RDRAM (RAMBUS Dynamic RAM) is a type of memory that is faster and more expensive than SDRAM. This memory can be used on systems that use on Pentium 4.
EDO RAM (Extended Data Out RAM) is a type of memory used in systems Pentium. Suitable for bus speeds up to 66 MHz.

SOURCE

Solid Converter PDF 3.1

09/10/2009 18:06

often we find file on internet or we already have that file in for a PDF. at the same time we need that file can be edited to word (.doc)

of course we will find difficulty in editing the file.
to solve this problem I'm use software converter that can change a PDF file into a file. doc

to get this software can be downloaded here

MYSQL

09/10/2009 15:15

MySQL is a database software relations (Relational Database Management System or RDBMS), such as Oracle, Postgresql, MS SQL, and so on. MySQL AB product called as the most popular open source database in the world. Based on the research revealed that it many found the Web platform, and suitable to open source too. MySQL is a database of the most widely used. According to the company's developers, MySQL has been installed in about 3 million computers. many of sites rely on MySQL to work day and night to pump the data for its visitors.

MySQL Features

When the series 3:22 MySQL began adopted a lot of people, then at 3:23 and the 4.0 series is there much improvement in terms of technology. This can not be separated from the demands of an increasingly rely on user MySQLwhich are requires that features more.

At 3:23 MySQL series adds three new table types: first MyISAM, which until now become the default table type; the second BerkeleyDB, which was first added to the MySQL transaction capabilities; and third InnoDB.

In the new series 4.0 this is alpha stage, the developer promised to make MySQL to one degree higher. Features that had always requested will be granted, such as subselek (at 4.1), union (4.0), foreign key constraint (4.0 or 4.1, InnoDB is provided though this in 3.23.x), stored procedures (4.1), view (4.2 ), cursor (4.1 or 4.2), trigger (4.1). MySQL AB develops and remains dedicated to improving MySQL, and MySQL to maintain as the most popular open source database.

Advantages MySQL

The main thing make MySQL so popular among the Web is because it is fit to work in that environment. First, MySQL is available on various Linux platforms and various Unix variants. Something that does not have M. access, for example, when Access is very popular in the Windows platform. Many Unix-based Web server, it automatically makes the Access can not be used because he did not have the ability client-server/networking.

Second, the features MySQL is required in many web applications. For example, SQL LIMIT clause, practically to do paging. Or type fulltext index fields, for full text searching.

Third, MySQL has a low overhead connection. This characteristic makes MySQL suitable to work with CGI applications, which is in every request script will connect, send one or more SQL commands, and then disconnect again. Try doing this with Oracle or Interbase. So the load a few requests per second Web server / database you may soon give up because they can not compensate for this burden.

Samba

09/10/2009 01:09

Samba is the SMB protocol implementation of the protocol used by the operating system such as MS Windows MS to sharing files and printers. With SMB you can access the files & printers shared by a Windows computer or to share files & printers on your linux computer.

Share access with smbclient

smbclient allows for accessing other computers share with the interface such as ftp.
Syntaxnya are:

smbclient service [options]

Where service formed / / computer's name / namashare eg / / ntserver / cdrom. For example we want to access the cdrom directory contents of our computers and running ntserver

[zakaria@linux zakaria]$ smbclient "//itcom2/my documents"
Password: 
smb: \>

Where service in the form / / computer's name / smbclient share name will provide a prompt for a password, and password as usual will not be displayed. If everything is OK will exit prompt 'smb:>' at this prompt you can type the commands used in ftp such as ls, get, put, mget, mput, binary, etc.. When you finish just type quit. / / ntserver / cdrom. For example we want to access the cdrom directory contents of our computers stay running ntserver

-U username 
     Connection with another user name from username linux 
 -W workgroup 
     Connection with the other workgroup name than the settings in / etc / smb.conf 
 -n NetBios_Name 
     Connection with a different host name with the computer host name 
 -I IP address 
     Connection to a specific host with the IP. Very useful if Samba does not work to resolve host names on purpose.

In addition it has fuction for ftp that mean can share Windows smbclient can also display a list of directories shared by a computer in a way:

smbclient -L computer_name

Mounting Share with smbmount

Another way to access the share is to mount the remote share to a directory using smbmount. Once mounted you can access your shsre such as access to common directories. Like mount, smbmount must be run by root.

the syntax is:

smbmount service mountpoint [-o options]

Where service in the form / /computer_name / share_name eg / / ntserver / cdrom and mountpoint is the directory that will be mounted. Parameters of his options in the form keyword = value and separated by commas for each parameter.

Where option is often used is:

username = user

Connection with another user name from username linux (root)

netbiosname = name

Connection by using a different host name with the computer host name

workgroup = name

Connection with the workgroup name other than that in the settings in / etc / smb.conf

ip = 1.2.3.4

Connection to a particular host with a specific IP such as 1.2.3.4. Very useful if Samba does not work to resolve host names on purpose.

EXAMPLE
[root@linux /root]# smbmount "//itcom2/my documents" /mnt/net/itcom2 -o netbiosname=linux
Password:

SOURCE

Setting Dlink Access Point

08/10/2009 16:44

IMPORTANT to note when using the wireless network, that network without wires and can be accessed by any PC / laptop that has a wireless card that is still within reach of the applicable Access Point (1-400 meter / depending on specification). Therefore must be careful in doing the ACCESS POINT SETTINGS, PASSWORD in order to give users / PCs outside the network can not be entered in the Wireless network is installed.

Conversely, if the protection on Access Point settings are not good, then the wireless network will be accessible by the PC from the outside. Because every time the PC / laptop can enter the Access Point, it will be able to enter the network and can connect with other computers connected to the same Access Point. The average current Access Point can reach up to a radius of 400 Meters in the room open, or less if it get a barrier, either a wall or other building. (different from the hub that can only up to a distance of 100 m)

INSTALLING NETWORK CARD ON COMPUTER & ACCESS POINT

The first time you have to install the Wireless card in your PC and install the driver.
Ignore if the cards are placed immediately asked the driver when windows is enabled, wait until the drivers are installed the new card on the restart Windows then re-installed the drivers with the card itself

Card Wireless driver is not installed

After the cards are installed and drivers are installed, then please restart Windows.

D_Link Wireless Card already installed.

IP ADDRESS ACCESS POINT (DEFAULT)

The next step is to set IP Address, like if we use an Ethernet card. IP settings for the first time should follow the default IP settings of the ACCESS POINT. In the AP Dlink brand they use the default IP address 192.168.0.50. Therefore IP settings on the PC should follow these settings (eg 192.168.0.51 and so on).
When setting IP Address on a PC is different from that of the AP, the network can not connect to the AP. After a PC has its IP, set IP in accordance with AP, then the PC can perform Access Point settings, including changing the IP address on the AP, Password, Name AP, etc..
Each AP is connected to must be given different IP and NAME , like providing IP and naming the computer.

SETTING IP ADDRESS on wireless CARD

Click properties on the Network Places icon. If there ETHERNET & WIRELESS network will appear under the icon like picture below. If you want just the wireless used, it easy you can disable the ethernet. So he lived alone WIRELESS CARD that you are taking.

Double Click on the Wireless Connection icon, the dialog will appear as below. For IP settings, please click the Properties button.
on the red circel is max speed using the wireless (54 Mbps), different with using wire it can be up to 100Mbps. the signal strength will be reduce if betwen pc and AP get obstacles those are like wall, building etc.
after click botton properties will be appear pic like below
set Ip address just like ip address on default AP. with choosing internet protocol (TCP/IP) and the click properties botton.
after IP address already setted and then going to tab menu wireless network.
actually sign "Default" on the blue circle doesn't exist. please click botton refresh in order to searching AP. on the sign "default" stting using genuine setting. on the other explanation will explain how to change the AP name, especially if the network is built using more than one AP, each AP must be given different names. When finished click OK.
so Ip address on the wireless car already set as IP on the AP that is 192.168.0.?.
to see available AP on the network with click view menu available wireless Network.
seen pic below there is AP with the name "default" to connect with its AP you can select "Allow me to ...." and then click botton Connect.

if we have connected to AP small ison wireless will be lit with the green color.

CHANGING IP ADDRESS ON THE ACCESS POINT

Dlink AP using default ip address 192.168.0.51. so to login and setting its AP we can use browser just lik IE wih typing https://192.168.0.50 and then click enter. fill username with admin and password leave with thank blank.

the main screen AP
make sure that driver for network card and AP already installed.
as we have login to AP menu we can set ip Address on AP like we want. ex we change th IP weth 192.168/1/1 etc.. if we change the IP AP automatically we have to change the IP network card on the clients.

seen like on the pic after we have setted the AP like we want ang then click apply bottons
Each AP is setting, the indicator light will be glow. And it took a while until the new settings can be used.
Number of IP has been used for the Access Point should not be used for the IP Address on a PC or other Accesss Point.
If the settings Access Point IP address changed, so every time you log into the admin menu should also use the new IP address is. In the default use https://192.168.0.50. if the IP changed to 192.168.1.55 then to enter the admin settings to use https://192.168.1.55

CHANGE THE NAME OF ACCESS POINT

AP with D-Link brand is using name "default" we have not set at all. This default name should be changed so that can be easily recognized, especially if in the same network there are more than sati AP installed. Suppose we call it with: AP_SAP01, AP_SAP02, AP_SAP03, and so on.
Why Access Point needs to be given a name? Because the AP in a network status almost are like PCs in the network. Each AP has an IP address & naming each of which may not be equal to one another.
Login through Internet Explorer, by typing https://192.168.0.50 and hit enter. In the AP Dlink brand to enter the first time using admin user without a password.

Picture Password display on AP-Dlink
Clin on the menu wireless and then change the name of AP and SSID. SSID stand for the name of AP whisch is ditected by computer client.i

Default setting on the screen on the top changed with the name like showing pic below.
the name Ap already changed and click botton apply
after we setted AP the indicator lamp will be on and need a few second for the new setting can be used.
please try to searching again untill AP ditected and click botton connect.

SETUP PASSWORD ACCESS POINT

using password on AP is really important. if AP already setted up its password so the computers outside which are don' have authority can't access AP.
steps must be doing to get its password is using browser IE with type https://192.168.0.50 and then press enter. from the first time Dlink using user name = admin and password leave it blank.

WEP = Enable, if we want set the password
WEP Ecryption it can be use 64 Bit
WEP Mode there are two choice, the first HEX (Hexadesimal) with the limit password 10 numbers and the second is ASCII (tex) with 5 numbers.
the best protection is using WPA_PSK. see manual book of AP for detail information.

picture display wireless connection to AP if AP using password fill it with the password suitable with the password AP made.

if the password is correct you can try to scan with angry IP scanner software like picture below.

like picture above tell us
IP : 192.168.0.50 is IP for Access Point
IP : 192.168.0.51 is Ronggolawe's PC

if the password wrong that mean IP for AP will not appear on software Angry IP scanner

CHANGE PASSWORD ADMIN

for the first time AP is using password "admin" and password "blank"
that password can be changed
from the first screen, take menu tool then change the password like we want.

HOW MUCH CLIENT CAN BE ACCESS BY ACCES POINT?

IF hub we know it using port. so AP we can set for how much PC will allowed to access.
on AP DLINK there are choices 1 up 13 channel. default this AP is 6 channel that mean only 6 recommended to access. more than 6 pc will decreased speed of access.P

USING WINDOWS SETTING AND CARD WIRELESS PROGRAM

picture below showing if we use windows interface.
if it dont use interface window to setting wireless need use aplication software card wireless. double click icon on the right below taskbar.

PROTECT COMPUTER FROM THE COMPUTER OUTSIDE WHICH IS DONT HAVE AUTORITY

it recommended to computers using internet access. click botton properties wireless and take Advanced tab menu.
click " protect my computer ....." and the press OK

THE RIGHT PLACE FOR ACCESS POINT

AP can be placed anywhere but it recommended setup AP on the rite place whis is can be accessed PC with strength signal.
place AP on the wall of wall it mean AP easily can be accessed.

this picture giving example for us setup AP on the rite place.

Description Picture:

HUB still used on the server, so the PC server directly connected to the network via UTP cable directly to the HUB. No need to use the wireless card.
Hub which is in the server pulled to the points location of Access Point.
If no hub installed, then the Access Point must be set as BRIDGE AP, this field depends on the situation where the network is connected. If a strong signal between the AP, the better without using the hub.
Of all the existing building, drawn 1 cable from the server to each building. The cable is drawn and connected to the Access Point whic are installed in each building. Then each of every computer in the building can access the network through the AP.
Network Cable LAN can be combined with Wireless networks, by plugging UTP cable to the UTP port is available at each Access Point, on the condition that the IP address of the network via wired and Wireless has the same IP range.

MISCELLANEOUS

Wear protective cable (cable deck) for the neat install, especially the cables down to the room
If there are cables that cross the inter-building. try using a cable wire for the reinforcement of crossing cable, Or better yet if using paralon as the cover cable.
If wireless doesnt ditect, please check the hardware properties. Perhaps on the disable status. Perform re-enable the wireless network.

Office 2007

08/10/2009 13:57

Today I just checked up the computer at Polda Metro Jaya because yesterday they just complained about the computer as a printer error actually as i checked there were only minor problem that is computer memory is to low to run too many applications. I finally suggest to add memory ram.

there was another oddity I i found that is when storing typing data that is typed using the standard version of Office 2007 there was an error when saving. I do not know what's wrong actually.

finally i found one solution to solve its problem that is i try to keep typing data using save as word 97-2003 documents type of data can be saved ..

is there netter can help me where actually the problem is?

All articles

Items: 41 - 50 of 62

<< < 3 | 4 | 5 | 6 | 7 > >>

Blog

Shakira : Waka Waka Lyrics

24/06/2010 13:11

Oooeeeeeeeeeeeeeeeehh You're a good soldier Choosing your battles Pick yourself up And dust yourself off Get back in the saddle You're on the front line Everyone's watching You know it's serious We are getting closer This isn't over The pressure is on You feel it But you...

Driver Compaq C700 for Windows XP

20/05/2010 00:02

Maybe we find dificulties as reinstal Notebookl compaq C700 series to find what suitable driver for windows XP operating system as my experience with this situation. because on the original website (compaq) doesnt give a link for its driver anymore. i have frustated as i was searching or browsing...

Downgrade windows 7 or w. vista to Windows Xp

10/05/2010 10:44

sometimes we confusing how to downgrade operation system which is recent using windows 7 because of something reason of us we would like to downgrade its system operation system to windows xp which is notabene more lighter, simple and easy to operate than windows 7 or windows vista, as we know that...

Setting up JAHT Wp-4001BR Acces point

25/01/2010 21:14

My office has two connection of internet those are Speedy from telkom and the other is 3Gnet. actually the main internet we are using is Telkom speedy because the connection laterly with speedy rather slow of download in this case we are hate why speedy like this. and then we decided to switch over...

How to start V900 B2

21/01/2010 15:28

Power on/off power on: turn the power switch to upside "On" position. The indicator will be light constantly with the red color for 3-5 seconds, then change to flash slowly, after about 35 seconds, the indicator change to green color flashed slowly (indicated cancel defense status) or green...

Feature V900 B2

21/01/2010 12:12

Set defence/Automatic alarm set defense is making the remote camera in alarm status. in this status, the connected wireless sensors, infrared body detector and motion detector which allowed be activated are in work status. under the defense status. if any wireless sensor, motion detector is...

User Authorization Level V900

21/01/2010 11:12

There are three levels remote camera user with different authority: Master: master need to store his/her mobile number in the camera, otherwise all the functions of the remote camera are disabled. only one master mobile number can be set in the remote camera. the camera will send the alarm message...

Pelan-Pelan Saja - Kotak

20/01/2010 19:37

ku tahu kamu pasti rasa apa yang ku rasa ku tahu cepat atau lambat kamu kan mengerti hati bila dipaksakan pasti takkan baik pantasnya kamu mencintai yang juga cintai dirimu cuma kamu reff: lepaskanlah ikatanmu dengan aku biar kamu senang bila berat melupakan aku pelan-pelan saja tak ada niat...

The Inventor of Important Things in the World

05/01/2010 23:00

do you know the inventors important things in the world. let's see who they are Inventor of steam machine is James Watt from England Inventor of Four Stroke Engine is Nicolaus Otto from German Inventor of Diesel Machine is Rudolf Diesel from German Inventor of Print machine is...

Tips for a quick temper

05/01/2010 20:28

The nature of irritability or emotional is something humane for someone. Various efforts and counseling can be done to overcome these negative attitudes. However, if the nature of your irritability natural light is still in its early stages, you can anticipate this before the burst of anger. Here...

1 | 2 | 3 | 4 | 5 > >>

Blog

Shakira : Waka Waka Lyrics

24/06/2010 13:11

Driver Compaq C700 for Windows XP

20/05/2010 00:02

Downgrade windows 7 or w. vista to Windows Xp

10/05/2010 10:44

Setting up JAHT Wp-4001BR Acces point

25/01/2010 21:14

How to start V900 B2

21/01/2010 15:28

Feature V900 B2

21/01/2010 12:12

User Authorization Level V900

21/01/2010 11:12

Pelan-Pelan Saja - Kotak

20/01/2010 19:37

The Inventor of Important Things in the World

05/01/2010 23:00

Tips for a quick temper

05/01/2010 20:28

1 | 2 | 3 | 4 | 5 > >>

My Empty Talk

Special day

13/12/2009 15:18

how happy i am that today i got good news from my campus. they just call me that on graduate this year i get appreciation the best college. feeling not bellive it that i have its prise.. although i am not study in favorite campus but with what i get now its make so happy. the graduation ceremony...

voip gateway

24/11/2009 23:24

i have a task from my bos to setting up voip gateway using 3 cx software for replace pbx/pabx and for adapter voip gateway (still looking) any suggest what adapter voip gateway must be i get that mean support to 3cx 1. how about Linksys PAP2T? 2. how about Linksys SPA3102? 3. or airlive 111A? which...

strange network topology

21/11/2009 21:58

how wonder i am... that speedy connection (game package) can be accessed on the networking netcafe without using router or pc server as gateway.. this topology setting i found on the net cafe's fren of mine.. the topology as like below this is incredible.. so here just using switch to spreading...

My Hp is BAck

09/11/2009 19:41

i woke up earlier this morning with intent to pay the billing of speedy and remitting some money to our parents. because of i was in a hurry on the way to pay that bill my Hp fell down at that situation i thought i Hp was gone away. lucky i am bcos there is someone found my hp and after i sent sms...

Sharing Internet

23/10/2009 16:36

i don't know really how to share internet using router DLINK 615, all i know i have do but the result still nothing. its job make me crazy.. the conection is like this ISP 3Gnet ----> Spliltter/Modem ----> Router Dlink 615 ----> clients I got IP Address from ISP is IP =192.168.x.x ...

1st Job

19/10/2009 21:44

today is the first day im working. i did for my job today is making instalation for networking my new office. get tired really... cause today i have to climbing the wall get the roof to attach wire of UTP. my job for today was not finish cause the crimping isnt do yet. tomorow will be...

accident

12/10/2009 21:58

finaly i got a signature from mr hidayat although i rather get difficulties to find her place. as i arrived there Rudi has been waiting for me and then he showed to meet mr hidayat in his room, after we get in front of his room i knocked the door of his room and ofcourse not forget to say hello. i...

Signature

12/10/2009 10:23

i just have called from Rudi that he ask me to meet Mr Hidayat (our lecture) for a signatur.e our paper. in this case i have problem that i already have messages from Heru before (heru ask me that as i gonna meet Mr Hidayat to take him together). today i have to meet mr hidayat but in this...

So Much Thanks to Mas Ary

11/10/2009 18:23

I don't know what must i say to u mas Ary. you have much help me in anything. How to repay you have done to me. only pray to God to u right now i can do for you. May God Bless U.

Acer Aspire One

10/10/2009 22:35

while i write this article im istalling aspire one whose my friend he ask me to help him. the spesifikasi its netbook are intel atom cpu N270 1.60Ghz memori ram 1.5 Gb hardisk 8 GB considering the Hardis only 8 Gb so i decided to make its hdd just one partition. this netbook doesnt...

1 | 2 > >>

N3v3r G1v3 uP

Blog

Blog

Blog

My Empty Talk

Tags

Contact

PROJECTS

Search site